/ Miscellaneous

HTML5 vs Flash

HTML5 vs Flash

The rivalry between HTML and Flash is not a new one. Especially in the community of vloggers, live streamers, broadcasters, etc., the debate about the pros and cons of each has been a hot one for a long time. The use of HTML or Flash has an impact that isn’t only confined to the audience, but the content creators themselves as well. With the newest addition of HTML5 to the family of HTML, the argument has been kindled again and people have been comparing HTML5 with Flash in hopes of making an informed decision. If you are in search of the same answer, then you have landed on the right page. We have thoroughly compared the two below that will put all the information that you need at your disposal.

Which One Is The Newer?

The first and the foremost lead that HTML5 takes over Flash is the fact that it is the newer of the two contestants. If you have been creating content for a long time, you must already be familiar with the importance of keeping up-to-date. You may call it exaggerated but the use of Flash has now become obsolete. Remember, if you are doing something, it’s always better to do it right. In other words, why stick to the obsolete technology when you have the newer one at your disposal?

Which One Is More Widely Supported?

A major benefit that you get to relish provided that you choose HTML5 over Flash is its native support and compatibility with all major browsers. It goes without saying that HTML is the standard protocol to deliver content on the internet to the audience from all over the world. With the use of HTML5, therefore, you can have the peace of mind that your content is accessible for people across the globe. Flash, on the other hand, is an additional plug-in that has to be installed to the browser before Flash-based content can be accessed by the users. In this fast-paced era, no one has time to install additional plug-ins to access the content.

How Do They Compare In Terms Of Performance?

You would perhaps wish it to be a category where Flash will finally make its mark but yet another time, HTML5 takes the lead here as well. The more power do they require out of the machine on which they are being used, the less accessible is the content for the user since not everybody has a high-end computer system. A pronounced benefit of using HTML5 is that it requires minimal processing power from the device that you are using while Flash is considerably heavier when it comes to being processed. Simply put, with HTML5, there is no risk of compromising the performance of your machine but the use of Flash, on the other hand, can make your device considerably slower at times.

Which One Is Cheaper To Use?

Whenever you are drawing a comparison between two technologies, the cost certainly is a defining factor. When it comes to choosing between HTML5 and Flash, you should always keep in mind that being open-source, HTML5 is absolutely free for you to use. There are no additional or hidden charges associated with the use of HTML5. Flash, on the other hand, requires a more dedicated environment for development. This is what required purchasing that translated into higher cost for Flash as compared to the HTML5.

What Else Does The HTML5 Offer?

It should go without saying that the benefits of HTML5 are not confined to what’s mentioned above. With HTML5, you get the convenience of a user-friendly environment with seamless search engine optimization. This is specifically important for businesses that are looking forward to bring more traffic to the content and consequently improve the conversion rates and sales to make more profits. The overall experience with Flash, however, is not nearly as friendly as HTML with no search engine optimization features whatsoever. What's more is that HTML5, being the latest technology is still evolving which means there is a lot of room for improvement making it an even better choice for the time to come.

In terms of editing, HTML5 is a suitable option for the vast majority of the users as well. The user-friendly tools like Construct 2 are more than sufficient to address the editing requirements of an average user. Flash Builder, that is a commonly used editor for Flash-based programs is also similar in terms of features and functionalities, however, the cost it incurs is relatively higher as compared to that of Construct 2. HTML5 has already made its mark when it comes to offering greater capabilities in terms of audio and video. The question of interoperability that has always been raised with Flash is kind of a given provided that you chose HTML5.

Lastly, there is nothing more convincing for you to opt for HTML5 rather than Flash then knowing that the giants in the world of technology are already in favor of HTML5. So while you may not have sufficient information, they absolutely do and with that, they decided to support HTML5 against Flash. Steve Job’s has always been vocal about the inferiority of Flash which is why it is not compatible with the iOS either. Youtube that started its journey with Flash has also made a switch to HTML5 to ensure better accessibility for its audience as well. This should be more than sufficient of the evidence to invoke an inclination towards HTML5 in you.

Final Note

We have tried to be as thorough in drawing the comparison between HTML5 and Flash as we could. As evident, there is hardly any domain in which Flash manages to take the lead against HTML5. The benefits that HTML5 has to offer are not concealed in any way. They are visible and prominent for the content creators as well as for the audience that they wish to target. We have provided that information that you needed. The power to make the choice between HTML5 and Flash is entirely yours.